
1
FN6617.2
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas Inc. 2007, 2008, 2011. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.
ISL12030
Real Time Clock with 50/60 Hz Clock and Alarms
Low Power RTC with 50/60 Cycle AC
Input, Alarms and Daylight Savings
Correction
The ISL12030 device is a low power real time clock with
50/60 AC input for timing synchronization, clock/calendar
registers, single periodic or polled alarms. There are 128
bytes of user SRAM.
The oscillator uses a 50/60 cycle sine wave input. The real
time clock tracks time with separate registers for hours,
minutes, and seconds. The calendar registers contain the
date, month, year, and day of the week. The calendar is
accurate through year 2100, with automatic leap year
correction and auto daylight savings correction.
Pinout
ISL12030
(8 LD SOIC)
TOP VIEW
Features
50/60 Cycle AC as a Primary Clock Input for RTC Timing
Real Time Clock/Calendar
- Tracks Time in Hours, Minutes, Seconds and tenths of a
Second
- Day of the Week, Day, Month and Year
Auto Daylight Saving Time Correction
- Programmable Forward and Backward Dates
Dual Alarms with Hardware and Register Indicators
- Hardware Single Event or Pulse Interrupt Mode
128 Bytes of User SRAM
I2C Interface
- 400kHz Data Transfer Rate
Pb-Free (RoHS Compliant)
Applications
Utility Meters
Control Applications
Vending Machines
White Goods
Consumer Electronics
NC
GND
AC
NC
1
2
3
4
8
7
6
5
VDD
IRQ
SCL
SDA
Ordering Information
PART NUMBER
PART
MARKING
VDD RANGE
TEMP RANGE
(°C)
PACKAGE
(Pb-Free)
PKG
DWG #
ISL12030IBZ
12030 IBZ
2.7V to 5.5V
-40 to +85
8 Ld SOIC
M8.15
NOTE:
1. Add “-T*” suffix for tape and reel. Please refer to
TB347 for details on reel specifications.
2. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte
tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil
Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-
020.
3. For Moisture Sensitivity Level (MSL), please see device information page for
ISL12030. For more information on MSL please see techbrief
Data Sheet
May 5, 2011